Designed for pocket-hole systems, Kreg pocket-hole screws increase the strength of a pocket-hole joint. Cut-thread pattern prevents splitting. Coarse thread is for any combination of softwoods, plywood, and composites, and fine is for hardwoods. Kreg SML-C1-500 1-Inch #8 Coarse Washer-Head Pocket Hole Screws, 500-Pack

N/A

1″ Fine Thread self tapping screws are specially designed for pocket hole joinery. They feature a self tapping auger point that eliminates pre drilling and a flat head that seats flushly in the bottom of the pocket hole. All of our screws utilize a No. 2 Kreg SPS-F1-500 Pocket Hole Screws 1-Inch #2 Fine Square ... read more

N/A

KREGs one-piece design eliminates clogging and provides a much smoother and faster drilling stroke than the drill bits with replaceable center drills. The DKDB bit is made of cobalt steel that increases the bits life. Because the DKDB bit is also 3/8″ diameter it can be used in any of KREGs other manual jigs as ... read more

N/A

For use with Kreg pocket hole Jigs, these blocks are great for quick and easy repair work. Each spacer compensates for 1/4″ in material thickness. Simply add the blocks to the bottom of the Jig’s Drill Guide. Use one block for 3/4″ material, 2 for 1″ material and 3 for 1-1/4″ material. Includes 3 blocks. ... read more

N/A

Designed for pocket-hole systems, Kreg pocket-hole screws increase the strength of a pocket-hole joint. Cut-thread pattern prevents splitting. Coarse thread is for any combination of softwoods, plywood, and composites, and fine is for hardwoods. Kreg SML-C150-500 Pocket Hole Screws 1-1/2-Inch #8 Coarse Washer-Head 500ct

N/A

The Kreg DDS 3-Inch and 6-Inch Driver Set gives you choices. The Deep 2 Driver recess resists cam-out and comes in the 3-inch and 6-inch length set. The 3-inch length is great in tight spots; the 6-inch length is easy to use. Drivers for the drill come in either the standard or hardened tip version. ... read more

N/A

TD Industrial Aluminum Pocket Hole Jig System. This Pocket Hole Jig is a must for joining all kinds of woodwork. Our Pocket Hole Jig features: Aluminum Jig, 3/8″ Step Drill Bit, Drill Bit Collar, 3″ and 6″ No. 2 square drive bits, Hex keys, Bag of wood screws, Wood Storage Case TD Industrial Adjustable Pocket ... read more

N/A

The Kreg SML-C250-250 2-1/2-inch Coarse Screw – 250 Count #8 square drive washer head screws. The washer head of this screw is Kreg’s most popular head style as the wide bearing surface of the head will not overdrive in the bottom of the pocket. This is especially important in softer material such as plywoods and ... read more

N/A

The Kreg SML-C125-500 1-1/4-inch #8 Coarse Screw – 500 Pack is a pack of 1-1/4-inch coarse thread, #8 square drive washer head screws. The washer head of this screw is Kreg’s most popular head style as the wide bearing surface of the head will not overdrive in the bottom of the pocket. This is especially ... read more

N/A

The Porter-Cable 560 QUIKJIG Pocket Hole Jig Kit uses a built-in drill bit collar set up that does not need to be changed for different material thicknesses. The Porter Cable 560 has an automatic depth control system allowing for easy set up for different materials and uses a removable dust port that can be hooked ... read more

N/A